Regrouting a Shower: Essential Tips to Prevent Leaks

Have you noticed water pooling on the bathroom floor outside your shower? You may see cracked or discoloured grout lines, and a persistent musty odour may linger despite your regular cleaning efforts. It’s possible that the paint on the wall opposite the shower is bubbling or that the timber door frame is swelling due to excess moisture.

It can be tempting to think that a pipe has burst behind the wall. in many cases, water seeps through damaged grout and worn-out silicone. A simple regrouting and resealing process can effectively resolve that leak without requiring the removal of any tiles.

This guide details when regrouting your shower can successfully fix a leak and when it may not be sufficient. You will learn about the regrouting process offered by Leaking Showers Sealed, including how long you should avoid using the shower afterwards. If you suspect that the grout is the source of your problem, our dedicated shower regrouting page provides a complete overview of our services in North Richmond, the Hills District, and the North Shore.

Can Regrouting Effectively Fix My Shower Leak?

• Regrouting can effectively stop leaks when water escapes through damaged grout or silicone.
• We remove the old grout and replace it with Ardex EG15 epoxy grout, which is non-porous, and reseal corners and junctions using Ardex neutral cure silicone.
• Your tiles remain intact, allowing you to fix a leaking shower without the need for major renovations or tile removal.
• If the leak is from a faulty pipe, drain, or tap, you will need to consult a plumber. A compromised membrane beneath the tiles will require tile removal, meaning a regrout alone will not resolve these problems.
• It is recommended to wait at least 24 hours before using the shower again.

Contact Leaking Showers Sealed if you have observed mouldy grout, a damp smell, or water leaking around your shower.

The Significance of Shower Regrouting Explained

Shower regrouting involves the removal of old, cracked, or mouldy grout from between your shower tiles, followed by the application of new grout that reinstates the seal between the joints. At Leaking Showers Sealed, we utilise Ardex EG15 epoxy grout, which is non-porous and prevents water and mould from penetrating, unlike traditional cement grout.

Over time, grout deteriorates due to exposure to hot water, cleaning chemicals, and minor structural movements. This deterioration results in cracks and pinholes that allow water to seep through the joints, even when the tiles themselves appear intact. Often, the damage remains hidden as water accumulates behind the tiles and beneath the shower floor.

Regrouting restores these joints, making the shower watertight once again. It also eliminates unsightly stained grout lines that can make a clean bathroom look dated, all without the cost and disruption of a complete renovation.

Will Regrouting My Shower Resolve the Leaks?

Regrouting effectively addresses leaks when water escapes through compromised grout or silicone, which are common causes of shower leaks. The first step is identifying the source of the water to determine if regrouting is the appropriate solution.

When Is Regrouting and Resealing the Best Solution?

Regrouting and resealing is the ideal approach when you notice cracked, crumbling, or missing grout, or mould that repeatedly returns despite cleaning. It is also effective if the silicone around corners and the shower base has split or detached. In these cases, the tiles remain intact, and water is leaking through the joints.

When Should You Consult a Plumber Instead of Regrouting?

If the leak originates from a pipe within the wall, the shower drain, or a tap, regrouting will not fix the problem. We work in collaboration with plumbers, and if our inspection indicates a problem with a pipe, drain, or tap, we will provide a detailed explanation and refer you to a plumber for further assistance.

What If the Waterproofing Membrane Beneath the Tiles Is Damaged?

A waterproofing membrane is located behind the tiles and under the shower floor. Prolonged exposure to water through the grout can damage this membrane. Replacing a failing membrane requires tile removal, classifying it as renovation work that we do not undertake.

Andreas, who holds NSW licence 89111C, is experienced in waterproofing. Our team has the training to identify a compromised membrane. If we find during our inspection that your shower requires more than just a regrout, we will inform you before commencing any work.

Addressing issues at the first signs of trouble helps protect the membrane. Fresh epoxy grout and new silicone provide a barrier against water, making it essential to tackle cracked grout before further damage occurs.

Recognising the Need for Shower Regrouting

Look out for these indicators that suggest your shower may be leaking through the grout and silicone:

• Cracked, loose, or missing grout between the tiles
• Mould that quickly reappears after cleaning
• Damp odours or visible moisture damage near the shower
• Water pooling outside the shower or leaking into adjacent areas
• Bubbling paint, discoloured walls, or soft floorboards
• Tiles that feel loose or sound hollow when tapped

If you notice any of these symptoms, it’s likely that the grout and silicone are no longer effectively containing water within the shower. Tiles that sound hollow when tapped, known as drummy tiles, may need refixing before the shower can be resealed, and we check for these during our inspection.

What to Anticipate During the Regrouting Process with Leaking Showers Sealed

The regrouting process at Leaking Showers Sealed consists of five essential steps, ensuring that your tiles remain undisturbed throughout.

Step 1: Inspecting the Shower and Identifying the Leak Source

We conduct a thorough inspection of the grout, silicone, tiles, and surrounding areas to identify where the water is escaping. If our inspection reveals an issue with a pipe, drain, or tap, we will inform you before scheduling any regrouting.

Step 2: Removing Old Grout and Silicone

We carefully cut out the old grout and remove all existing silicone, including any layers applied over previous silicone. New grout cannot bond effectively to old grout, making it crucial to start with a clean surface.

Step 3: Thoroughly Cleaning the Tiles and Exposed Joints

We ensure the tiles and empty joints are meticulously cleaned to eliminate soap scum, dust, and mould, guaranteeing that the new grout adheres properly to a pristine surface.

Step 4: Applying Epoxy Grout for Shower Regrouting

We fill the joints with Ardex EG15 epoxy grout. For a shower base seal, we regrout the shower floor, the floor-to-wall junction, and the perimeter. For a complete shower seal, we also regrout every wall grout line.

Step 5: Resealing Corners, Junctions, and Tap Flanges

We apply Ardex ST neutral cure silicone to reseal internal corners and junctions. For a complete shower seal, we also ensure the tap flanges are sealed.

Typically, a shower base seal takes around 3 to 4 hours to complete, while a full shower seal for both walls and floor generally requires 4 to 5 hours. It is essential to wait at least 24 hours before using the shower again to allow the grout and silicone to cure properly.

Can Regrouting Eliminate Mould in Showers?

Regrouting effectively removes mould that has penetrated the grout, as the mouldy grout is replaced. Surface cleaning with bleach or mould sprays only tackles the outer layer, allowing mould to reappear since it resides within the grout where water gets trapped. For further information on why shower grout becomes stained and damaged, please refer to our guide.

Can Regrouting Help You Avoid a Complete Bathroom Renovation?

For many homeowners, regrouting provides a practical solution to delay or avoid a comprehensive bathroom renovation. If the tiles are in good condition and the leak can be traced to the grout and silicone, a regrout and reseal will restore the shower’s watertight integrity. This approach also allows you more time to save for a future renovation.

A regrout, reseal, and thorough clean can also serve as an effective refresh before listing a home for sale or for landlords between tenant occupancies. Our article on regrouting a shower as a cost-effective renovation highlights how significantly a regrout can enhance a bathroom’s appearance.

Is DIY Regrouting a Shower a Viable Option?

While DIY grout kits are readily available at hardware stores, regrouting a shower properly is more complex than it seems. Without the right tools and expertise, you risk:

• Damaging or cracking tiles during the removal of old grout
• Leaving remnants of old grout in the joints, preventing proper bonding of new grout
• Overlooking silicone joints, which are common sources of leaks
• Failing to identify a leak from a pipe or a compromised membrane

If you are uncertain about the source of the water, it is advisable to have the shower inspected before purchasing a DIY kit.

What Is the Cost of Shower Regrouting?

The cost of regrouting a shower varies based on several factors:

• Tile size, as smaller mosaics and 100mm tiles have more grout lines compared to larger 300mm or 600mm tiles
• The dimensions and layout of the shower, including features such as double showers, niches, and additional corners
• The condition of the grout and silicone, including issues like extensive mould, silicone layered over old silicone, or previous repairs needing removal
• Drummy or loose tiles that require refixing prior to resealing the shower

Regrouting is considerably more economical than a full bathroom renovation or retiling. For a cost estimate, please send photos of the shower floor, walls, and the complete shower to sales@leakingshowerssealed.com.au, or call 1300 815 512.

Common Questions About Shower Regrouting

How long does the regrouting process take?
A shower base seal typically requires approximately 3 to 4 hours on site, while a complete shower seal for both walls and floor takes around 4 to 5 hours. Please allow at least 24 hours before using the shower again.

Will regrouting effectively stop a leak?
Yes, if the leak is due to damaged grout or silicone. Regrouting will not address leaks from a pipe, drain, or tap, which require a plumber, nor will it resolve a failed membrane, which necessitates tile removal.

How often should regrouting be performed?
The frequency of regrouting depends on the type of grout used, the bathroom’s ventilation, and the cleaning practices employed. Signs that indicate the need for regrouting include cracked grout, recurring mould, and persistent damp odours. Our article on how long shower regrouting lasts explains the factors that influence this.

Can new grout be applied over old grout?
No. New grout applied over existing grout will not bond correctly and will not resolve the leak. It is essential to remove all old grout before commencing the regrouting process.

Is regrouting covered by warranty?
Yes. A regrout and reseal includes a 10-year warranty on Ardex products and a 7-year workmanship warranty from Leaking Showers Sealed, contingent upon a site assessment.

Why Trust Leaking Showers Sealed for Your Shower Regrouting Needs?

• Since 2016, we have specialised in regrouting and resealing showers without the need to remove tiles.
• We use Ardex EG15 epoxy grout and Ardex ST neutral cure silicone for outstanding results.
• Every regrout and reseal comes with a 10-year warranty on Ardex products and a 7-year workmanship warranty, subject to site assessment.
• We have received over 300 Google reviews across our three locations.
• Our services extend to regrouting and resealing showers throughout North Richmond, the Hills District, and the North Shore of Sydney.

If your shower is leaking, do not hesitate to address the potential damage occurring behind the tiles. Send us photos of your shower or contact us to schedule an inspection. We will assess whether a regrout and reseal can effectively stop the leak.